Monitor Audio Gold 300 5.1 + Add (A) AV Receiver

Monitor Audio Gold W12

For lovers of deep and refined bass notes, the Gold W12 is a must-have addition to any speaker set-up. Every soundtrack is reinforced by the deep and balanced depth effortlessly delivered by our premium subwoofer.

Technical Specifications : 

• System Format - Long-throw 12" driver featuring ‘dished’ C-CAM cone. Dual 200 mm ABR (auxiliary bass radiator). Front baffle 36 mm, cabinet 25 mm MDF construction with internal bracing and sealed amplifier compartment
• Lower Frequency Limit - -3 dB @ 25 Hz / -10 dB @ 20 Hz (Free Field). Music preset (Default): -3 dB @ 19 Hz / -10 dB @ 16 Hz (In Room). Assignable Low Frequency Limit Protection Filter: -3 dB @ 12 Hz
• Upper Frequency Limit - -3 dB @ 150 Hz
• Drive Unit Complement -1 x 12" C-CAM subwoofer driver featuring triple suspension and 3" long throw voice coil
• Linear Driver Excursion - 19 mm Peak to Peak,
• Total displacement -1.6 Litres
• Amplifier Output - 600 W
• Amplifier Classification - Class D with high current Switch mode power supply (SMPSU)
• DSP - 50 MIPS DSP Core giving 512 instructions per sample, 138 dB of dynamic range and 56-bit double precision processing, dynamically updated by an up to 50 MHz MCU
• Digital Conversion - 24 bit/up to 48 kHz ADCs & DACs built into ADAU1701 DSP Core
• LED UI Control Panel - Adjustable brightness 0% - 100%, configurable auto off feature. Quick access to menu items: Trim & Mute, LPF, Phase, Preset Select
• Global Settings (via SubConnect) - Display Brightness (0-100%), Dim (to 10% or to Off), Default Preset, Mute Link Outputs, 12 V Trigger Assignment (Power On / Off or Preset select), Input gain (Master -80 to +20 dB, Trim -11 to +11 dB, Mute), Phase (0 – 360 in 15-degree steps), Night Mode Threshold (0 dB to -36 dB), Auto On / Off (Enable Signal Sense, Always On, Time to off 5 – 240 mins)
• User Presets (via SubConnect) - 4 fully configurable user Presets including, Preset Name, LPF Frequency (5 Hz Steps from 20 – 135 Hz), LPF Slope Order (-12 or -24 dB/Oct), Input (Stereo, LFE or Both), Trim Offset (-6 to +6 dB), EQ mode (Impact, Music, Movie or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On / Off), Night Mode (On / Off)
• User Equalisation (via SubConnect) - 6 fully controllable EQ filters and 4 default filters with gain offset per preset, Voreinstellungen: Flat / Music / Movie / Impact
• Room Correction EQ - 6 System controlled parametric EQ filters set using advanced detection algorithm. Measurement can be initiated from the control panel or the SubConnect with up to microphone 6 positions (default 2)
• Night Mode - Night mode, assignable (On or Off) per Preset with global threshold (0 dB to -36 dB). Introduces dynamic range reduction lowering the level of loud sections
• Phase Control - 0 – 360 degrees Increments of 15 degrees with a pure invert at 180 degrees
• Low Pass Filter Alignment - 2nd or 4th order (12 or 24 dB/Octave), Increments of 5 Hz from 35 Hz to 135 Hz
• Auto Sensing Input Requirements - Line Level >1mV on unbalanced and balanced inputs. Auto Standby feature, adjustable between 5 – 240 minutes in increments of 5 minutes
• Digital Volume Level - -11 to +11 dB in 1 dB increments, via the control panel. -80 to +20 in 1 dB increments, via SubConnect application
• IR Remote Control Code - Supplied IR remote. Front facing IR receiver with red LED indication
• SubConnect (PC Application) - Windows (7 onwards) (32/64 bit) compatible setup application available from the Monitor Audio website. Allows the user to control advanced subwoofer setup features. Settings can be saved while not connected to the subwoofer for off-site setup
• Audio Input/Outputs - LFE balanced input (XLR), LFE unbalanced input (RCA), stereo unbalanced inputs (RCA). LFE balanced output (XLR), LFE unbalanced output (RCA), stereo unbalanced outputs (link RCA)
• Connection - 12 V Trigger in (3.5 mm mono mini-jack, 6 V threshold), assignable to On/Off or Pre-set change, 3.5 mm Microphone input jack (mic supplied), RJ45 connector supporting RS232 (EIA/TIA - 561, Tx Pin 6, Rx Pin 5, Gnd Pin 4), IR repeater – Output (3.5 mm mono mini-jack), USB – Type B, for connecting to SubConnect PC application and Firmware update
• Electrical Certifications - CE / CB/ ETL / Fcc / CCC/ ErP (Energy saving compliant)
• Mains Input Voltage - 100 – 120 Vac ~60Hz / 220 – 240 Vac ~50/60 Hz (Manually selected)
• Power Consumption - Maximum 600 W, Standby <0.5 W (ErP compliance)
• Fuse Type - 20 mm T8AL 250 VAC
• Weight (unpacked) - 26.98 kg (59 lb 8.3 oz)
• External Dimensions (Including Amp, Drivers and Terminals (H x W x D)) - 413 x 410 x 433.5 mm (161/4 x 161/8 x 171/16")
• External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D)) - 445 x 410 x 433.5 mm (171/2 x 161/8 x 171/16")

Monitor Audio Gold C250

The Gold C250 has been created to bring every movie soundtrack to life and to give a powerful yet detailed performance. A truly immersive experience is guaranteed, and the speaker’s discreet form ensures it will look good in any room.

Technical Specifications :

• System Format - 3-way
• Frequency Response (-6 dB) - 40 Hz – 50 kHz
• Sensitivity (1W@1M) - 88 dB
• Nominal Impedance - 4 Ohms
• Minimum Impedance - 2.8 Ohms @ 3.7 kHz
• Maximum SPL - 111 dBA (each)
• Power Handling (RMS) - 200 W
• Recommended Amplifier Requirements - 80 – 200 W
• Bass Alignment - Sealed cabinet
• Crossover Frequency - L.F/ M.F: 1.2 kHz M.F/ H.F: 4 kHz
• Drive Unit Complement - 2 x 61/2" RDT II long-throw bass driver
  1 x 21/2" C-CAM mid-range driver
  1 x MPD high-frequency transducer
• External Dimensions (Including Grille and Terminals (H x W x D)) - 205 x 537 x 330.6 mm (81/16 x 211/8 x 13")
• External Dimensions (including Outrigger Feet and Spikes (H x W x D)) - N/A
• Weight (each) - 14.48 kg (31 lb 14 oz)

Gold FX

The Gold FX has been designed to immerse the listener in a compelling surround sound experience. Monitor Audio’s premium driver technology ensures an unforgettable audio performance.

Technical Specifications :

• System Format - 2-way
• Frequency Response (-6 dB) - 60 Hz – 50 kHz
• Sensitivity (1W@1M) - 86 dB
• Nominal Impedance - 4 Ohms
• Minimum Impedance - 3.7 Ohms @ 3 kHz
• Maximum SPL - 109 dBA (Pair)
• Power Handling (RMS) - 100 W
• Recommended Amplifier Requirements - 30 – 100 W
• Bass Alignment - Sealed cabinet
• Crossover Frequency - 2.5 kHz
• Drive Unit Complement - 2 x 4" C-CAM mid-range driver 2 x MPD high-frequency transducer
• External Dimensions (Including Grille and Terminals (H x W x D)) - 270 x 341.8 x 160 mm (105/8 x 137/16 x 65/16")
• External Dimensions (including Outrigger Feet and Spikes (H x W x D)) - N/A
• Weight (each) - 6.2 kg (13 lb 10 oz)

Denon AVR-X1700H

• Designed for 4K or 8K setups, the AVR-X1700H delivers the ultimate 3D audio home theater/gaming experiences and supports the latest HDMI specifications.
  
• Powerful, discrete 7-channel amplifier
  
• Advanced 8K HDMI video with eARC support
  
• Full 3D audio support with virtual surround sound
  
• Enhanced gaming experiences

Click here to know more

Denon AVR-X2700H

Denon AVR-X2700H 7.2ch 8K AV receiver with 95W per channel fully supports 3D audio formats as well as the latest HDMI specifications such as 8K/60Hz, select 4K/120Hz* pass-through and upscaling, HDR10+, Dynamic HDR, ALLM and more.

Click here to know more

Denon AVR-X3800H

With 9 channels of amplification, up to 4 independent subwoofers, Dolby Atmos and DTS:X, plus IMAX Enhanced and Auro-3D, the AVC-X3800H envelops larger living spaces in theatre-quality sound. Enjoy amazing 8K video quality and with HEOS® Built-in, wirelessly stream and share online music between rooms.

Click here to read more.