Audio Technica AT 4040 microphone

₹ 44000.00 ₹ 35999.00 Sale Sale

Audio Technical AT 4040 microphone Overview

Technically-advanced large diaphragm Transformer less circuitry virtually eliminates low-frequency distortion Precision-machined acoustic element baffle enhances element stability 80 Hz high-pass filter and 10 dB pad

Features

  • A blend of technical precision and artistic inspiration, the AT4040 large-diaphragm side-address studio condenser offers exceptionally low noise, wide dynamic range and high-SPL capability
  • Its low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction.

 

FREQUENCY RESPONSE 20-20,000 Hz
IMPEDANCE 100 ohms
ELEMENT
Externally-polarized (DC bias) condenser
POLAR PATTERN Cardioid
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY
-32 dB (25.1 mV) re 1V at 1 Pa
OUTPUT CONNECTOR Integral 3-pin XLRM-type
PHANTOM POWER REQUIREMENTS 48V DC, 4.2 mA typical
MAXIMUM INPUT SOUND LEVEL
145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
NOISE 12 dB SPL
SIGNAL TO NOISE RATIO 82 dB, 1 kHz at 1 Pa
SWITCHES roll-off; 10 dB pad (nominal)
DYNAMIC RANGE 133 dB, 1 kHz at Max SPL
DIMENSIONS
6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Go to full site